|
Omron has now released Version 3 of their popular "all in one" software package, CX-One.
CX-One is a comprehensive software package that integrates PLC Programming Software with Support Software for setting up Networks, Programmable Terminals, Servo Systems, Inverters, and Temperature Controllers.
CX-One now supports memory access with tags
With CX-One version 3.0, PLC data can be accessed using tags such as "Equipment_A_Number_produced" instead of addresses such as "D200." Previously addresses needed to be specified when programming Programmable Terminals and host applications, but now data can be accessed without knowing the specific addresses, enabling parallel development. If tags are used to access data, there is also no need to change the settings in the Programmable Terminals or host applications even if the data addresses change in the PLC. This allows easy modifications for changes in facilities.
More New Features:
|
PLC Programming Software CX-Programmer Ver.8.0
• Support for SYSMAC CJ2 CPU Units.
• Support Software can be connected to a USB or EtherNet/IP port.
• Batch backup/restore of PLC data.
• Supports programming and access functions using tags.
Screen Designing Software CX-Designer Ver.3.0
• Supports tag communications with SYSMAC CJ2 CPU Units.
Network Design Tool CX-Integrator Ver.2.3
• Supports CompoNet.
• Network Design Tool Network Configurator
• Supports EtherNet/IP networks.
FA Communications Software
• SYSMAC Gateway (Communications Middleware)
• CX-Compolet (.Net component/ActiveX Control)
• CX-Reporter (Data collection software)
|
CX-One V3 includes ALL of the following:
CX-Programmer Ver.8.0
Application software to create and debug programs for SYSMAC CS/CJ/CP/NSJ series, C-series, and CVM1/C-series CPU Units.
CX-Integrator Ver.2.3
Application software to build and set up FA networks, such as Controller Link, DeviceNet, CompoNet, CompoWay, and Ethernet networks. The Routing Table Component and Data Link Component can be started from here. DeviceNet Configuration functionality is also included.
Switch Box Utility Ver.1.6
Utility software that helps you to debug PLCs. It helps you to monitor the I/O status and to monitor/change present values within the PLC you specify.
CX-Protocol Ver.1.8
Application software to create protocols (communications sequences) between SYSMAC CS/CJ/CP/NSJ-series or C200HX/HG/HE Serial Communications Boards/Units and general-purpose external devices.
CX-Simulator Ver.1.9
Application software to simulate SYSMAC CS/CJ/CP/NSJ-series CPU Unit operation on the computer to debug PLC programs without a CPU Unit.
CX-Position Ver.2.5
Application software to create and monitor data for SYSMAC CS/CJ-series Position Control Units.
CX-Motion-NCF Ver.1.6
Application software to monitor and set parameters for SYSMAC CS/CJ-series Position Control Units and Servo Drivers that support MECHATROLINK-II communications.
CX-Motion-MCH Ver.2.2
Application software to create data for SYSMAC CS/CJ-series MCH Units, create motion programs, and perform monitoring.
CX-Motion Ver.2.3
Application software to create data for SYSMAC CS/CJ-series, C200HX/HG/HE, and CVM1/CV-series Motion Control Units, and to create and monitor motion control programs.
CX-Drive Ver.1.6
Application software to set and control data for Inverters and Servos.
CX-Process Tool Ver.5.2
Application software to create and debug function block programs for SYSMAC CS/CJ-series Loop Controllers (Loop Control Units/Boards, Process Control CPU Units, and Loop Control CPU Units).
Faceplate Auto-Builder for NS Ver.3.1
Application software that automatically outputs screen data as project files for Ns-series PTs from tag information in function block programs created with the CX-Process Tool.
CX-Designer Ver.3.0
Application software to create screen data for NS-series PTs.
CX-Configurator FDT Ver.1.1
Application software for setting various units by installing its DTM module.
CX-Thermo Ver.4.0
Application software to set and control parameters in components such as Temperature Control Units.
CX-FLnet Ver.1.0
Application software for system setting and monitoring of SYSMAC CS/CJ-series Fl-net Units.
Network Configurator Ver.3.0
Application software for setting the tag datalink at the built-in EtherNet/IP port.
CX-Server Ver.4.0
Middleware necessary for CX-One applications to communicate with OMRON components, such as PLCs, Display Devices, and Temperature Control Units.
PLC Tools (Installed automatically)
A group of components used with CX-One applications, such as the CX-Programmer and CX-Integrator. Includes the following: I/O tables, PLC memory, PLC Setup, Data Tracing/Time Chart Monitoring, PLC Error Logs, File Memory, PLC clock, Routing Tables, and Data Link Tables.
|
